| Picture |
Heading |
Updated |
 |
SC Fiber Patch Cords
Fiber optic jumpers refer to optical fibers directly connected to desktop computers or devices to facilitate device connection and management. Used for jumper wiring from equipment to fiber optic cabling links. It has a thick protective layer and is gener |
2024-08-13 |
 |
Fiber Optical Fast Connector
1. Product classification and structural requirements
1.1 The fiber optic field connectors used for FTTx fiber optic networks are SC type and can be matched with standard SC adapters.
1.2 According to the end face form of the pin body, it can be div |
2024-08-13 |
 |
Cisco 10G SFP Module
The Cisco 10G SFP Module is a cost-saving 10G connection solution. The 10G optical port to electrical port module is also called the 10G SFP+ electrical port module. This module is specially designed for high-speed communication links. Compared with ordin |
2024-08-13 |
 |
OM3 Fiber Patch Cords
Fiber optic jumpers (also known as fiber optic connectors) refer to optical cables with connector plugs installed at both ends to achieve active connection of the optical path. In addition, the tail fiber mentioned is a fiber optic cable with only one end |
2024-08-13 |
 |
OM4 Fiber Patch Cables
1. OM1 refers to multimode optical fibers with a core diameter of 850/full injection bandwidth exceeding 200/. km for 5 Oum or 62.5um fibers;
2. OM2 refers to multimode optical fibers with a core diameter of 850/full injection bandwidth exceeding 500/. |
2024-08-13 |
 |
FTTH Indoor Drop Cable
Leather wire optical cable is commonly known as indoor suspended wiring optical cable. With the good development momentum of the domestic fiber optic access market, fiber optic access has become a hot topic in the field of optical communication. In fiber |
2024-08-13 |
 |
CAT6 UTP Lan Cable
CAT6 UTP Lan Cable is a Category 6 network cable. Refers to Category 6 unshielded twisted pairs, which have significantly improved various parameters and expanded bandwidth to 250MHz or higher. Cable that meets the CAT-6 standard, with a transmission rate |
2024-08-12 |
 |
1000FT CAT6 Ethernet Cable
The transmission frequency of 1000ft Cat6 Ethernet Cable is between 1MHz and 250MHz.
The transmission frequency of Category 6 cable is between 1MHz and 250MHz. The Category 6 cabling system should have a large margin of comprehensive attenuation to cro |
2024-08-12 |
Friends links